LIVE-BOOT(7) Debian Live Projekt LIVE-BOOT(7)


live-boot - System Boot Skripte


live-config enthaelt die Skripte welche ein Debian Live System waehrend des Startvorganes (early userspace) konfigurieren. live-boot is a hook for the initramfs-tools, used to generate a initramfs capable to boot live systems, such as those created by live-helper(7). This includes the Debian Live isos, netboot tarballs, and usb stick images. At boot time it will look for a (read-only) media containing a "/live" directory where a root filesystems (often a compressed filesystem image like squashfs) is stored. If found, it will create a writable environ‐ ment, using aufs, for Debian like systems to boot from.


live-boot kann durch Boot Parameter oder durch Konfigurationsdateien konfiguriert werden.

Kernel Parameter

live-boot ist nur dann aktiv, wenn 'boot=live' als Kernel Parameter benutzt wird. In addition, there are some more boot parameters to influence the be‐ haviour, see below.


live-boot can be configured (but not activated) through configuration files. Those files can be placed either in the root filesystem itself (/etc/live/boot.conf, /etc/live/boot.d/), or on the live media (live/boot.conf, live/boot.d/).


live-boot currently features the following parameters. access=ACCESS Set the accessibility level for physically or visually impared users. ACCESS must be one of v1, v2, v3, m1, or m2. v1=lesser vis‐ ual impairment, v2=moderate visual impairment, v3=blindness, m1=minor motor difficulties, m2=moderate motor difficulties. console=TTY,SPEED Set the default console to be used with the "live-getty" option. Example: "console=ttyS0,115200" debug Makes initramfs boot process more verbose. Use: debug=1 Without setting debug to a value the messages may not be shown. fetch=URL httpfs=URL Another form of netboot by downloading a squashfs image from a given url. The fetch method copies the image to ram and the httpfs method uses fuse and httpfs2 to mount the image in place. Copying to ram requires more memory and might take a long time for large images. However, it is more likely to work correctly because it does not require networking afterwards and the system operates faster once booted because it does not require to contact the server anymore. Due to current limitations in busyboxs wget and DNS resolution, an URL can not contain a hostname but an IP only. Not working: Working: Also note that therefore it's currently not possible to fetch an image from a namebased virtualhost of an httpd if it is sharing the ip with the main httpd instance. You may also use the live iso image in place of the squashfs image. iscsi=server-ip[,server-port];target-name Boot from an iSCSI target that has an iso or disk live image as one of its LUNs. The specified target is searched for a LUN which looks like a live media. If you use the iscsitarget software iSCSI target solution which is packaged in Debian your ietd.conf might look like this: # The target-name you specify in the iscsi= parameter Target <target-name> Lun 0 Path=<path-to-your-live-image.iso>,Type=fileio,IOMode=ro # If you want to boot multiple machines you might want to look at tuning some parameters like # Wthreads or MaxConnections fromiso=/PATH/TO/IMAGE Allows to use a filesystem from within an iso image that's avail‐ able on live-media. ignore_uuid Do not check that any UUID embedded in the initramfs matches the discovered medium. live-boot may be told to generate a UUID by set‐ ting LIVE_GENERATE_UUID=1 when building the initramfs. integrity-check If specified, an MD5 sum is calculated on the live media during boot and compared to the value found in md5sum.txt found in the root directory of the live media. ip=[CLIENT_IP]:[SERVER_IP]:[GATEWAY_IP]:[NETMASK]:[HOST‐ NAME]:[DEVICE]:[AUTOCONF] [,[CLIENT_IP]:[SERVER_IP]:[GATEWAY_IP]:[NET‐ MASK]:[HOSTNAME]:[DEVICE]:[AUTOCONF]] Let you specify the name(s) and the options of the interface(s) that should be configured at boot time. Do not specify this if you want to use dhcp (default). It will be changed in a future release to mimick official kernel boot param specification (e.g. ip=,:::::eth1:dhcp). ip=[frommedia] If this variable is set, dhcp and static configuration are just skipped and the system will use the (must be) media-preconfigured /etc/network/interfaces instead. {live-media|bootfrom}=DEVICE If you specify one of this two equivalent forms, live-boot will first try to find this device for the "/live" directory where the read-only root filesystem should reside. If it did not find some‐ thing usable, the normal scan for block devices is performed. Instead of specifing an actual device name, the keyword 'removable' can be used to limit the search of acceptable live media to remov‐ able type only. Note that if you want to further restrict the media to usb mass storage only, you can use the 'removable-usb' keyword. {live-media-encryption|encryption}=TYPE live-boot will mount the encrypted rootfs TYPE, asking the passphrase, useful to build paranoid live systems :-). TYPE sup‐ ported so far are "aes" for loop-aes encryption type. live-media-offset=BYTES This way you could tell live-boot that your image starts at offset BYTES in the above specified or autodiscovered device, this could be useful to hide the Debian Live iso or image inside another iso or image, to create "clean" images. live-media-path=PATH Sets the path to the live filesystem on the medium. By default, it is set to '/live' and you should not change that unless you have customized your media accordingly. live-media-timeout=SECONDS Set the timeout in seconds for the device specified by "live-media=" to become ready before giving up. module=NAME Instead of using the default optional file "filesystem.module" (see below) another file could be specified without the extension ".mod‐ ule"; it should be placed on "/live" directory of the live medium. netboot[=nfs|cifs] This tells live-boot to perform a network mount. The parameter "nfsroot=" (with optional "nfsopts="), should specify where is the location of the root filesystem. With no args, will try cifs first, and if it fails nfs. nfsopts= This lets you specify custom nfs options. nofastboot This parameter disables the default disabling of filesystem checks in /etc/fstab. If you have static filesystems on your harddisk and you want them to be checked at boot time, use this parameter, oth‐ erwise they are skipped. nopersistent disables the "persistent" feature, useful if the bootloader (like syslinux) has been installed with persistent enabled. noprompt Do not prompt to eject the CD or remove the USB flash drive on reboot. swapon This parameter enables usage of local swap partitions. persistent[={nofiles|cryptsetup}] live-boot will look for persistent and snapshot partitions or files labeled "live-rw", "home-rw", and files called "live-sn*", "home-sn*" and will try to, in order: mount as /cow the first, mount the second in /home, and just copy the contents of the latter in appropriate locations (snapshots). Snapshots will be tried to be updated on reboot/shutdown. Look at live-snapshot(1) for more informations. If "nofiles" is specified, only filesystems with matching labels will be searched; no filesystems will be traversed looking for ar‐ chives or image files. This results in shorter boot times. If "cryptsetup" is specified, filesystems stored on Luks-encrypted devices will be considered as well as others when searching for a persistence filesystem; the user will be prompted for any needed decryption passphrase. persistent-path=PATH live-boot will look for persistency files in the root directory of a partition, with this parameter, the path can be configured so that you can have multiple directories on the same partition to store persistency files. persistent-subtext=SUFFIX Add a suffix when searching for the image filenames or partition labels to use for the above mentioned persistent feature, the SUF‐ FIX will be added after a dash (e.g.: "live-sn" would transform to "live-sn-SUFFIX"). This is handy to test multiple live-boot based live-systems with different persistent storage choices. {preseed/file|file}=FILE A path to a file present on the rootfs could be used to preseed debconf database. package/question=VALUE All debian installed packages could be preseeded from command-line that way, beware of blanks spaces, they will interfere with pars‐ ing, use a preseed file in this case. quickreboot This option causes live-boot to reboot without attempting to eject the media and without asking the user to remove the boot media. showmounts This parameter will make live-boot to show on "/" the ro filesys‐ tems (mostly compressed) on "/live". This is not enabled by default because could lead to problems by applications like "mono" which store binary paths on installation. silent If you boot with the normal quiet parameter, live-boot hides most messages of its own. When adding silent, it hides all. todisk=DEVICE Adding this parameter, live-boot will try to copy the entire read-only media to the specified device before mounting the root filesystem. It probably needs a lot of free space. Subsequent boots should then skip this step and just specify the "live-media=DEVICE" boot parameter with the same DEVICE used this time. toram Adding this parameter, live-boot will try to copy the whole read-only media to the computer's RAM before mounting the root filesystem. This could need a lot of ram, according to the space used by the read-only media. union=aufs|unionfs By default, live-boot uses aufs. With this parameter, you can switch to unionfs.

FILES (old)

/etc/live.conf Some variables can be configured via this config file (inside the live system). live/filesystem.module This optional file (inside the live media) contains a list of white-space or carriage-return-separated file names corresponding to disk images in the "/live" directory. If this file exists, only images listed here will be merged into the root aufs, and they will be loaded in the order listed here. The first entry in this file will be the "lowest" point in the aufs, and the last file in this list will be on the "top" of the aufs, directly below /cow. With‐ out this file, any images in the "/live" directory are loaded in alphanumeric order. /etc/live-persistence.binds This optional file (which resides in the rootfs system, not in the live media) is used as a list of directories which not need be per‐ sistent: ie. their content does not need to survive reboots when using the persistence features. This saves expensive writes and speeds up operations on volatile data such as web caches and temporary files (like e.g. /tmp and .mozilla) which are regenerated each time. This is achieved by bind mounting each listed directory with a tmpfs on the original path.


/etc/live/boot.conf /etc/live/boot.d/ live/boot.conf live/boot.d/


live-snapshot(1) live-build(7) live-config(7)


Weitere Informationen ueber live-boot und das Debian Live Projekt koen‐ nen auf der Homepage unter <> und im Handbuch unter <> gefunden werden.


Fehler koennen durch Einreichen eines Fehlerberichtes fuer das live-boot Paket im Debian Bug Tracking System unter <> oder durch Senden einer E-Mail an die Debian Live Mailing Liste unter <> (englis‐ chsprachig) mitgeteilt werden.


live-boot wurde von Daniel Baumann <> fuer das Debian Projekt geschrieben.

2.0.15 2011-02-01 LIVE-BOOT(7)